A small wooden stool will be used in every home. With these chairs with great joy, children rush. Sitting on such a stool is convenient to clean the potatoes and perform other "sedentary" work. However, not many people decide to buy a small stool due to the fact that there is always a more important waste of funds. And here, to make a small wooden stool with your own hands the power of almost everyone. To make it you will need a jigsaw and a little imagination. Preparation. Layout of the board. Parts manufacturing, polishing. Assembling the stool. Painting. Preparation. Preparation of material and necessary tools plays an important role and saves time in the future. For the manufacture of the stool, we need: - a weathered board with a size of 800x200x25 mm (dimensions approximate, we can proceed from what is available), - 8 shiny screws (50-60 mm), - emery paper , - jigsaw, - screwdriver or screwdriver, - paint and varnish on wood, - tape measure, pencil and corner. Board marking. You need to start with the layout of the board.First of all, with the help of a corner, a pencil and a tape measure, we mark a rectangular piece without knots 32-33 cm long. This will be the upper part of our high chair. Next, note two segments of 23 cm - it will be sideways. Now it is desirable to give them some figured pattern. You can use any objects that have a circle for this purpose, simply by drawing them with a pencil. But, this method involves the irrational expenditure of time. After all, it is necessary to mark the center and other dimensions in each edge. Therefore, for the sides, it is better to use a pattern, cut out previously from thick cardboard or other material. It will allow you to quickly and easily mark a large number of sides. It is enough to attach a pattern and circle a pencil.By the way, using the figured pattern on the side not only gives them a beautiful look, but also allows you to cut all unwanted knots.And immediately mark the jumper. It should be trapezoidal and have sides of 230 and 220 mm. The width of the jumper is not critical - from 80 to 120 mm.So,has a marked up board.
Stool assembled! Check it again on a flat surface. In case the stool staggers a bit, then we prick the legs until the product is completely stable.
10 Examples of using a perforated shelf in an interior
Apartment decoration styles
How to make a screen for a battery with your own hands: an effective solution
How to make a beautiful volumetric hairstyle with your own hands
Monkey picture for kids
Malignant Tumor Therapy
Vase for cosmetics